FAQs

  • Calcium Based Stones like Marble, Onyx and Travertines etch and stain very easily, sometimes faster than it can be wiped away. No liquid sealer can prevent this issue. TuffSkin provides complete etch and stain protection.

  • TS is a proprietary stone laminate similar to a cell phone screen protector only on a larger scale. It is not a liquid at all. It is 4 mil polyester manufactured in roll form.

  • Yes. Stone protected will not etch.

  • TS protects against scratching, chipping and stun marks. Although the TS laminate could be damaged, your stone will not. We do recommend the use of cutting boards, placemats & trivets, just as you would with your natural stone. Should your tops become scratched TS is easily removed and replaced.

  • TS is very chemical resistant. There are no chemicals that can harm our coating.

  • Yes, TS can take the heat and stay in the kitchen. In the bathroom, blow dryers and curling irons do not affect TS. It can withstand heat up to 400 degrees fahrenheit.

  • Yes, TS it will not turn yellow and has a UV inhibitor built in to the hardcoat. In full sun, it should last approximately 2 years. With a patio cover expect it to last longer.

  • Historically, the decision to replace TuffSkin is an aesthetic determination based upon personal preference, whereby hotels replace every 8-10 years, busy restaurants and bars 1-5 years, and residential customers every 4-8 years. Regardless of when the decision is made to replace TuffSkin the performance of the product will remain acid, alkaline, water and oil proof for as long as TuffSkin is protecting the surface.

  • You may use a non-abrasive stone cleaner like TuffSkin All Purpose Cleaner or even a glass cleaner like ‘Sprayway’ to clean the surface of TuffSkin. Final buffing can be done with a dry microfiber towel.

  • A TS installation is environmentally safe and creates no odors.

  • Maximum bond time is 72 hours, but benchtops can be used within 2 hours after an install.

  • An average kitchen takes about 1 day. Hotel projects can be completed at 10-25 rooms per day.

  • Satin or Gloss are the two finishes available. Satin is used for a honed finish where Gloss is used for a polished finish.

  • TuffSkin is quoted per job including product, installation, and warranty. Prices depend of sizes, quantities, waste factor and service areas. Your closest Dealer will be happy to quote any project. TuffSkin is always a less expensive way to keep stone tops looking great.

  • No, TuffSkin only protects the surface of the countertop, slab backsplashes, and waterfall edges. The main areas where damage may occur.

  • TuffSkin never peels on its own. TuffSkin can be peeled back with some effort by humans. We have seen this in Bars, especially gaming bars. These types of installations require monthly review by staff. We see no issues in home or hotel room installations. TuffSkin is a better way to maintain these surfaces.

  • Clients most often report that their stone looks remarkable with TS’s color-enhancing effect. Satin enhances a honed finish while the gloss enhances a polished finish.

  • Aside from natural stone surfaces, TuffSkin can protect any flat surface needing protection. From engineered stone like quartz, metal, glass, and other flat surfaces.